diff --git a/CHANGES b/CHANGES
index 99f4ee2..6b07282 100644
--- a/CHANGES
+++ b/CHANGES
@@ -12,6 +12,10 @@ corrections:
 	cross compiling.
 	Thanks to Max Freisinger from Gentoo for seinding a patch.
 
+testing:
+	test.sh: Show a warning when phase-1 (insecure phase) of a security
+	test fails
+
 git:
 	Added missing Config/Makefile.DragonFly-2-8-2,
 	Config/config.DragonFly-2-8-2.h
diff --git a/test.sh b/test.sh
index 447febe..4a2072a 100755
--- a/test.sh
+++ b/test.sh
@@ -5381,7 +5381,8 @@ testserversec () {
     *)    arg="$arg1,$secopt1" ;;
     esac
     # start server
-    CMD3="$TRACE $SOCAT $opts $arg echo"
+    # use -s to make sure that it fails due to a sec violation, not some other failure
+    CMD3="$TRACE $SOCAT $opts -s $arg echo"
     $CMD3 2>"${te}3" &
     spid=$!
     if [ "$port" ] && ! wait${proto}${ipvers}port $port 1; then
@@ -5461,7 +5462,7 @@ elif [ -z "$SECONDADDR" ]; then
     $PRINTF "test $F_n $TEST... ${YELLOW}need a second IPv4 address${NORMAL}\n" $N
     numCANT=$((numCANT+1))
 else
-testserversec "$N" "$TEST" "$opts -s" "tcp4-l:$PORT,reuseaddr,fork,retry=1" "" "range=$SECONDADDR/32" "tcp4:127.0.0.1:$PORT" 4 tcp $PORT 0
+testserversec "$N" "$TEST" "$opts" "tcp4-l:$PORT,reuseaddr,fork,retry=1" "" "range=$SECONDADDR/32" "tcp4:127.0.0.1:$PORT" 4 tcp $PORT 0
 fi ;; # $SECONDADDR, NUMCOND
 esac
 PORT=$((PORT+1))
@@ -5477,7 +5478,7 @@ elif [ -z "$SECONDADDR" ]; then
     $PRINTF "test $F_n $TEST... ${YELLOW}need a second IPv4 address${NORMAL}\n" $N
     numCANT=$((numCANT+1))
 else
-testserversec "$N" "$TEST" "$opts -s" "tcp4-l:$PORT,reuseaddr,fork,retry=1" "" "range=$SECONDADDR:255.255.255.255" "tcp4:127.0.0.1:$PORT" 4 tcp $PORT 0
+testserversec "$N" "$TEST" "$opts" "tcp4-l:$PORT,reuseaddr,fork,retry=1" "" "range=$SECONDADDR:255.255.255.255" "tcp4:127.0.0.1:$PORT" 4 tcp $PORT 0
 fi ;; # $SECONDADDR, NUMCOND
 esac
 PORT=$((PORT+1))
@@ -5489,7 +5490,7 @@ case "$TESTS" in
 *%$N%*|*%functions%*|*%security%*|*%tcp%*|*%tcp4%*|*%ip4%*|*%range%*|*%$NAME%*)
 TEST="$NAME: security of TCP4-L with RANGE option"
 if ! eval $NUMCOND; then :; else
-testserversec "$N" "$TEST" "$opts -s" "tcp4-l:$PORT,reuseaddr,fork,retry=1" "" "range=127.0.0.0:255.255.0.0" "tcp4:$SECONDADDR:$PORT,bind=$SECONDADDR" 4 tcp $PORT 0
+testserversec "$N" "$TEST" "$opts" "tcp4-l:$PORT,reuseaddr,fork,retry=1" "" "range=127.0.0.0:255.255.0.0" "tcp4:$SECONDADDR:$PORT,bind=$SECONDADDR" 4 tcp $PORT 0
 fi ;; # Linux, NUMCOND
 esac
 PORT=$((PORT+1))
@@ -5501,7 +5502,7 @@ case "$TESTS" in
 *%$N%*|*%functions%*|*%security%*|*%tcp%*|*%tcp4%*|*%ip4%*|*%sourceport%*|*%$NAME%*)
 TEST="$NAME: security of TCP4-L with SOURCEPORT option"
 if ! eval $NUMCOND; then :; else
-testserversec "$N" "$TEST" "$opts -s" "tcp4-l:$PORT,reuseaddr,fork,retry=1" "" "sp=$PORT" "tcp4:127.0.0.1:$PORT" 4 tcp $PORT 0
+testserversec "$N" "$TEST" "$opts" "tcp4-l:$PORT,reuseaddr,fork,retry=1" "" "sp=$PORT" "tcp4:127.0.0.1:$PORT" 4 tcp $PORT 0
 fi ;; # NUMCOND
 esac
 PORT=$((PORT+1))
@@ -5512,7 +5513,7 @@ case "$TESTS" in
 *%$N%*|*%functions%*|*%security%*|*%tcp%*|*%tcp4%*|*%ip4%*|*%lowport%*|*%$NAME%*)
 TEST="$NAME: security of TCP4-L with LOWPORT option"
 if ! eval $NUMCOND; then :; else
-testserversec "$N" "$TEST" "$opts -s" "tcp4-l:$PORT,reuseaddr,fork,retry=1" "" "lowport" "tcp4:127.0.0.1:$PORT" 4 tcp $PORT 0
+testserversec "$N" "$TEST" "$opts" "tcp4-l:$PORT,reuseaddr,fork,retry=1" "" "lowport" "tcp4:127.0.0.1:$PORT" 4 tcp $PORT 0
 fi ;; # NUMCOND
 esac
 PORT=$((PORT+1))
@@ -5531,7 +5532,7 @@ ha="$td/hosts.allow"
 hd="$td/hosts.deny"
 $ECHO "socat: $SECONDADDR" >"$ha"
 $ECHO "ALL: ALL" >"$hd"
-testserversec "$N" "$TEST" "$opts -s" "tcp4-l:$PORT,reuseaddr,fork,retry=1" "" "hosts-allow=$ha,hosts-deny=$hd" "tcp4:127.0.0.1:$PORT" 4 tcp $PORT 0
+testserversec "$N" "$TEST" "$opts" "tcp4-l:$PORT,reuseaddr,fork,retry=1" "" "hosts-allow=$ha,hosts-deny=$hd" "tcp4:127.0.0.1:$PORT" 4 tcp $PORT 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -5550,7 +5551,7 @@ ha="$td/hosts.allow"
 hd="$td/hosts.deny"
 $ECHO "socat: $LOCALHOST" >"$ha"
 $ECHO "ALL: ALL" >"$hd"
-testserversec "$N" "$TEST" "$opts -s" "tcp4-l:$PORT,reuseaddr,fork,retry=1" "" "hosts-allow=$ha,hosts-deny=$hd" "tcp4:$SECONDADDR:$PORT,bind=$SECONDADDR" 4 tcp $PORT 0
+testserversec "$N" "$TEST" "$opts" "tcp4-l:$PORT,reuseaddr,fork,retry=1" "" "hosts-allow=$ha,hosts-deny=$hd" "tcp4:$SECONDADDR:$PORT,bind=$SECONDADDR" 4 tcp $PORT 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -5566,7 +5567,7 @@ elif ! feat=$(testaddrs tcp ip6) || ! runsip6 >/dev/null; then
     $PRINTF "test $F_n $TEST... ${YELLOW}TCP6 not available${NORMAL}\n" $N
     numCANT=$((numCANT+1))
 else
-testserversec "$N" "$TEST" "$opts -s" "tcp6-l:$PORT,reuseaddr,fork,retry=1" "" "range=[::2/128]" "tcp6:[::1]:$PORT" 6 tcp $PORT 0
+testserversec "$N" "$TEST" "$opts" "tcp6-l:$PORT,reuseaddr,fork,retry=1" "" "range=[::2/128]" "tcp6:[::1]:$PORT" 6 tcp $PORT 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -5581,7 +5582,7 @@ elif ! feat=$(testaddrs tcp ip6) || ! runsip6 >/dev/null; then
     $PRINTF "test $F_n $TEST... ${YELLOW}TCP6 not available${NORMAL}\n" $N
     numCANT=$((numCANT+1))
 else
-testserversec "$N" "$TEST" "$opts -s" "tcp6-l:$PORT,reuseaddr,fork,retry=1" "" "sp=$PORT" "tcp6:[::1]:$PORT" 6 tcp $PORT 0
+testserversec "$N" "$TEST" "$opts" "tcp6-l:$PORT,reuseaddr,fork,retry=1" "" "sp=$PORT" "tcp6:[::1]:$PORT" 6 tcp $PORT 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -5596,7 +5597,7 @@ elif ! feat=$(testaddrs tcp ip6) || ! runsip6 >/dev/null; then
     $PRINTF "test $F_n $TEST... ${YELLOW}TCP6 not available${NORMAL}\n" $N
     numCANT=$((numCANT+1))
 else
-testserversec "$N" "$TEST" "$opts -s" "tcp6-l:$PORT,reuseaddr,fork,retry=1" "" "lowport" "tcp6:[::1]:$PORT" 6 tcp $PORT 0
+testserversec "$N" "$TEST" "$opts" "tcp6-l:$PORT,reuseaddr,fork,retry=1" "" "lowport" "tcp6:[::1]:$PORT" 6 tcp $PORT 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -5615,7 +5616,7 @@ ha="$td/hosts.allow"
 hd="$td/hosts.deny"
 $ECHO "socat: [::2]" >"$ha"
 $ECHO "ALL: ALL" >"$hd"
-testserversec "$N" "$TEST" "$opts -s" "tcp6-l:$PORT,reuseaddr,fork,retry=1" "" "hosts-allow=$ha,hosts-deny=$hd" "tcp6:[::1]:$PORT" 6 tcp $PORT 0
+testserversec "$N" "$TEST" "$opts" "tcp6-l:$PORT,reuseaddr,fork,retry=1" "" "hosts-allow=$ha,hosts-deny=$hd" "tcp6:[::1]:$PORT" 6 tcp $PORT 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -5627,8 +5628,8 @@ case "$TESTS" in
 *%$N%*|*%functions%*|*%security%*|*%udp%*|*%udp4%*|*%ip4%*|*%range%*|*%$NAME%*)
 TEST="$NAME: security of UDP4-L with RANGE option"
 if ! eval $NUMCOND; then :; else
-#testserversec "$N" "$TEST" "$opts -s" "udp4-l:$PORT,reuseaddr,fork" "" "range=$SECONDADDR/32" "udp4:127.0.0.1:$PORT" 4 udp $PORT 0
-testserversec "$N" "$TEST" "$opts -s" "udp4-l:$PORT,reuseaddr" "" "range=$SECONDADDR/32" "udp4:127.0.0.1:$PORT" 4 udp $PORT 0
+#testserversec "$N" "$TEST" "$opts" "udp4-l:$PORT,reuseaddr,fork" "" "range=$SECONDADDR/32" "udp4:127.0.0.1:$PORT" 4 udp $PORT 0
+testserversec "$N" "$TEST" "$opts" "udp4-l:$PORT,reuseaddr" "" "range=$SECONDADDR/32" "udp4:127.0.0.1:$PORT" 4 udp $PORT 0
 fi ;; # NUMCOND
 esac
 PORT=$((PORT+1))
@@ -5639,7 +5640,7 @@ case "$TESTS" in
 *%$N%*|*%functions%*|*%security%*|*%udp%*|*%udp4%*|*%ip4%*|*%sourceport%*|*%$NAME%*)
 TEST="$NAME: security of UDP4-L with SOURCEPORT option"
 if ! eval $NUMCOND; then :; else
-testserversec "$N" "$TEST" "$opts -s" "udp4-l:$PORT,reuseaddr" "" "sp=$PORT" "udp4:127.0.0.1:$PORT" 4 udp $PORT 0
+testserversec "$N" "$TEST" "$opts" "udp4-l:$PORT,reuseaddr" "" "sp=$PORT" "udp4:127.0.0.1:$PORT" 4 udp $PORT 0
 fi ;; # NUMCOND
 esac
 PORT=$((PORT+1))
@@ -5650,7 +5651,7 @@ case "$TESTS" in
 *%$N%*|*%functions%*|*%security%*|*%udp%*|*%udp4%*|*%ip4%*|*%lowport%*|*%$NAME%*)
 TEST="$NAME: security of UDP4-L with LOWPORT option"
 if ! eval $NUMCOND; then :; else
-testserversec "$N" "$TEST" "$opts -s" "udp4-l:$PORT,reuseaddr" "" "lowport" "udp4:127.0.0.1:$PORT" 4 udp $PORT 0
+testserversec "$N" "$TEST" "$opts" "udp4-l:$PORT,reuseaddr" "" "lowport" "udp4:127.0.0.1:$PORT" 4 udp $PORT 0
 fi ;; # NUMCOND
 esac
 PORT=$((PORT+1))
@@ -5669,7 +5670,7 @@ ha="$td/hosts.allow"
 hd="$td/hosts.deny"
 $ECHO "socat: $SECONDADDR" >"$ha"
 $ECHO "ALL: ALL" >"$hd"
-testserversec "$N" "$TEST" "$opts -s" "udp4-l:$PORT,reuseaddr,retry=1" "" "tcpwrap-etc=$td" "udp4:127.0.0.1:$PORT" 4 udp $PORT 0
+testserversec "$N" "$TEST" "$opts" "udp4-l:$PORT,reuseaddr" "" "tcpwrap-etc=$td" "udp4:127.0.0.1:$PORT" 4 udp $PORT 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -5685,8 +5686,8 @@ elif ! feat=$(testaddrs tcp ip6) || ! runsip6 >/dev/null; then
     $PRINTF "test $F_n $TEST... ${YELLOW}TCP6 not available${NORMAL}\n" $N
     numCANT=$((numCANT+1))
 else
-#testserversec "$N" "$TEST" "$opts -s" "udp6-l:$PORT,reuseaddr,fork" "" "range=[::2/128]" "udp6:[::1]:$PORT" 6 udp $PORT 0
-testserversec "$N" "$TEST" "$opts -s" "udp6-l:$PORT,reuseaddr" "" "range=[::2/128]" "udp6:[::1]:$PORT" 6 udp $PORT 0
+#testserversec "$N" "$TEST" "$opts" "udp6-l:$PORT,reuseaddr,fork" "" "range=[::2/128]" "udp6:[::1]:$PORT" 6 udp $PORT 0
+testserversec "$N" "$TEST" "$opts" "udp6-l:$PORT,reuseaddr" "" "range=[::2/128]" "udp6:[::1]:$PORT" 6 udp $PORT 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -5701,7 +5702,7 @@ elif ! feat=$(testaddrs udp ip6) || ! runsip6 >/dev/null; then
     $PRINTF "test $F_n $TEST... ${YELLOW}UDP6 not available${NORMAL}\n" $N
     numCANT=$((numCANT+1))
 else
-testserversec "$N" "$TEST" "$opts -s" "udp6-l:$PORT,reuseaddr" "" "sp=$PORT" "udp6:[::1]:$PORT" 6 udp $PORT 0
+testserversec "$N" "$TEST" "$opts" "udp6-l:$PORT,reuseaddr" "" "sp=$PORT" "udp6:[::1]:$PORT" 6 udp $PORT 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -5716,7 +5717,7 @@ elif ! feat=$(testaddrs udp ip6) || ! runsip6 >/dev/null; then
     $PRINTF "test $F_n $TEST... ${YELLOW}UDP6 not available${NORMAL}\n" $N
     numCANT=$((numCANT+1))
 else
-testserversec "$N" "$TEST" "$opts -s" "udp6-l:$PORT,reuseaddr" "" "lowport" "udp6:[::1]:$PORT" 6 udp $PORT 0
+testserversec "$N" "$TEST" "$opts" "udp6-l:$PORT,reuseaddr" "" "lowport" "udp6:[::1]:$PORT" 6 udp $PORT 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -5735,7 +5736,7 @@ ha="$td/hosts.allow"
 hd="$td/hosts.deny"
 $ECHO "socat: [::2]" >"$ha"
 $ECHO "ALL: ALL" >"$hd"
-testserversec "$N" "$TEST" "$opts -s" "udp6-l:$PORT,reuseaddr" "" "lowport" "udp6:[::1]:$PORT" 6 udp $PORT 0
+testserversec "$N" "$TEST" "$opts" "udp6-l:$PORT,reuseaddr" "" "lowport" "udp6:[::1]:$PORT" 6 udp $PORT 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -5752,7 +5753,7 @@ elif ! testaddrs openssl >/dev/null; then
     numCANT=$((numCANT+1))
 else
 gentestcert testsrv
-testserversec "$N" "$TEST" "$opts -s" "SSL-L:$PORT,pf=ip4,reuseaddr,fork,retry=1,$SOCAT_EGD,verify=0,cert=testsrv.crt,key=testsrv.key" "" "range=$SECONDADDR/32" "SSL:$LOCALHOST:$PORT,cafile=testsrv.crt,$SOCAT_EGD" 4 tcp $PORT -1
+testserversec "$N" "$TEST" "$opts" "SSL-L:$PORT,pf=ip4,reuseaddr,fork,retry=1,$SOCAT_EGD,verify=0,cert=testsrv.crt,key=testsrv.key" "" "range=$SECONDADDR/32" "SSL:$LOCALHOST:$PORT,cafile=testsrv.crt,$SOCAT_EGD" 4 tcp $PORT -1
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -5768,7 +5769,7 @@ elif ! testaddrs openssl >/dev/null; then
     numCANT=$((numCANT+1))
 else
 gentestcert testsrv
-testserversec "$N" "$TEST" "$opts -s" "SSL-L:$PORT,pf=ip4,reuseaddr,fork,retry=1,$SOCAT_EGD,verify=0,cert=testsrv.crt,key=testsrv.key" "" "sp=$PORT" "SSL:$LOCALHOST:$PORT,cafile=testsrv.crt,$SOCAT_EGD" 4 tcp $PORT -1
+testserversec "$N" "$TEST" "$opts" "SSL-L:$PORT,pf=ip4,reuseaddr,fork,retry=1,$SOCAT_EGD,verify=0,cert=testsrv.crt,key=testsrv.key" "" "sp=$PORT" "SSL:$LOCALHOST:$PORT,cafile=testsrv.crt,$SOCAT_EGD" 4 tcp $PORT -1
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -5784,7 +5785,7 @@ elif ! testaddrs openssl >/dev/null; then
     numCANT=$((numCANT+1))
 else
 gentestcert testsrv
-testserversec "$N" "$TEST" "$opts -s" "SSL-L:$PORT,pf=ip4,reuseaddr,fork,retry=1,$SOCAT_EGD,verify=0,cert=testsrv.crt,key=testsrv.key" "" "lowport" "SSL:$LOCALHOST:$PORT,cafile=testsrv.crt,$SOCAT_EGD" 4 tcp $PORT -1
+testserversec "$N" "$TEST" "$opts" "SSL-L:$PORT,pf=ip4,reuseaddr,fork,retry=1,$SOCAT_EGD,verify=0,cert=testsrv.crt,key=testsrv.key" "" "lowport" "SSL:$LOCALHOST:$PORT,cafile=testsrv.crt,$SOCAT_EGD" 4 tcp $PORT -1
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -5804,7 +5805,7 @@ ha="$td/hosts.allow"
 hd="$td/hosts.deny"
 $ECHO "socat: $SECONDADDR" >"$ha"
 $ECHO "ALL: ALL" >"$hd"
-testserversec "$N" "$TEST" "$opts -s" "SSL-L:$PORT,pf=ip4,reuseaddr,fork,retry=1,$SOCAT_EGD,verify=0,cert=testsrv.crt,key=testsrv.key" "" "tcpwrap-etc=$td" "SSL:$LOCALHOST:$PORT,cafile=testsrv.crt,$SOCAT_EGD" 4 tcp $PORT -1
+testserversec "$N" "$TEST" "$opts" "SSL-L:$PORT,pf=ip4,reuseaddr,fork,retry=1,$SOCAT_EGD,verify=0,cert=testsrv.crt,key=testsrv.key" "" "tcpwrap-etc=$td" "SSL:$LOCALHOST:$PORT,cafile=testsrv.crt,$SOCAT_EGD" 4 tcp $PORT -1
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -5821,7 +5822,7 @@ elif ! testaddrs openssl >/dev/null; then
 else
 gentestcert testsrv
 gentestcert testcli
-testserversec "$N" "$TEST" "$opts -s" "SSL-L:$PORT,pf=ip4,reuseaddr,fork,retry=1,$SOCAT_EGD,verify,cert=testsrv.crt,key=testsrv.key" "cafile=testcli.crt" "cafile=testsrv.crt" "SSL:$LOCALHOST:$PORT,cafile=testsrv.crt,cert=testcli.pem,$SOCAT_EGD" 4 tcp $PORT -1
+testserversec "$N" "$TEST" "$opts" "SSL-L:$PORT,pf=ip4,reuseaddr,fork,retry=1,$SOCAT_EGD,verify,cert=testsrv.crt,key=testsrv.key" "cafile=testcli.crt" "cafile=testsrv.crt" "SSL:$LOCALHOST:$PORT,cafile=testsrv.crt,cert=testcli.pem,$SOCAT_EGD" 4 tcp $PORT -1
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -5838,7 +5839,7 @@ elif ! testaddrs openssl >/dev/null; then
 else
 gentestcert testsrv
 gentestcert testcli
-testserversec "$N" "$TEST" "$opts -s -lu -d" "ssl:$LOCALHOST:$PORT,pf=ip4,fork,retry=2,verify,cert=testcli.pem,$SOCAT_EGD" "cafile=testsrv.crt" "cafile=testcli.crt" "ssl-l:$PORT,pf=ip4,reuseaddr,$SOCAT_EGD,cafile=testcli.crt,cert=testsrv.crt,key=testsrv.key" 4 tcp "" -1
+testserversec "$N" "$TEST" "$opts -lu -d" "ssl:$LOCALHOST:$PORT,pf=ip4,fork,retry=2,verify,cert=testcli.pem,$SOCAT_EGD" "cafile=testsrv.crt" "cafile=testcli.crt" "ssl-l:$PORT,pf=ip4,reuseaddr,$SOCAT_EGD,cafile=testcli.crt,cert=testsrv.crt,key=testsrv.key" 4 tcp "" -1
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -5858,7 +5859,7 @@ elif ! feat=$(testaddrs tcp ip6) || ! runsip6 >/dev/null; then
     numCANT=$((numCANT+1))
 else
 gentestcert6 testsrv6
-testserversec "$N" "$TEST" "$opts -s" "ssl-l:$PORT,pf=ip6,reuseaddr,fork,retry=1,$SOCAT_EGD,verify=0,cert=testsrv6.crt,key=testsrv6.key" "" "range=[::2/128]" "ssl:[::1]:$PORT,cafile=testsrv6.crt,$SOCAT_EGD" 6 tcp $PORT -1
+testserversec "$N" "$TEST" "$opts" "ssl-l:$PORT,pf=ip6,reuseaddr,fork,retry=1,$SOCAT_EGD,verify=0,cert=testsrv6.crt,key=testsrv6.key" "" "range=[::2/128]" "ssl:[::1]:$PORT,cafile=testsrv6.crt,$SOCAT_EGD" 6 tcp $PORT -1
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -5877,7 +5878,7 @@ elif ! feat=$(testaddrs tcp ip6) || ! runsip6 >/dev/null; then
     numCANT=$((numCANT+1))
 else
 gentestcert6 testsrv6
-testserversec "$N" "$TEST" "$opts -s" "ssl-l:$PORT,pf=ip6,reuseaddr,fork,retry=1,$SOCAT_EGD,verify=0,cert=testsrv6.crt,key=testsrv6.key" "" "sp=$PORT" "ssl:[::1]:$PORT,cafile=testsrv6.crt,$SOCAT_EGD" 6 tcp $PORT -1
+testserversec "$N" "$TEST" "$opts" "ssl-l:$PORT,pf=ip6,reuseaddr,fork,retry=1,$SOCAT_EGD,verify=0,cert=testsrv6.crt,key=testsrv6.key" "" "sp=$PORT" "ssl:[::1]:$PORT,cafile=testsrv6.crt,$SOCAT_EGD" 6 tcp $PORT -1
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -5896,7 +5897,7 @@ elif ! feat=$(testaddrs tcp ip6) || ! runsip6 >/dev/null; then
     numCANT=$((numCANT+1))
 else
 gentestcert6 testsrv6
-testserversec "$N" "$TEST" "$opts -s" "ssl-l:$PORT,pf=ip6,reuseaddr,fork,retry=1,$SOCAT_EGD,verify=0,cert=testsrv6.crt,key=testsrv6.key" "" "lowport" "ssl:[::1]:$PORT,cafile=testsrv6.crt,$SOCAT_EGD" 6 tcp $PORT -1
+testserversec "$N" "$TEST" "$opts" "ssl-l:$PORT,pf=ip6,reuseaddr,fork,retry=1,$SOCAT_EGD,verify=0,cert=testsrv6.crt,key=testsrv6.key" "" "lowport" "ssl:[::1]:$PORT,cafile=testsrv6.crt,$SOCAT_EGD" 6 tcp $PORT -1
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -5916,7 +5917,7 @@ ha="$td/hosts.allow"
 hd="$td/hosts.deny"
 $ECHO "socat: [::2]" >"$ha"
 $ECHO "ALL: ALL" >"$hd"
-testserversec "$N" "$TEST" "$opts -s" "ssl-l:$PORT,pf=ip6,reuseaddr,fork,retry=1,$SOCAT_EGD,verify=0,cert=testsrv6.crt,key=testsrv6.key" "" "tcpwrap-etc=$td" "ssl:[::1]:$PORT,cafile=testsrv6.crt,$SOCAT_EGD" 6 tcp $PORT -1
+testserversec "$N" "$TEST" "$opts" "ssl-l:$PORT,pf=ip6,reuseaddr,fork,retry=1,$SOCAT_EGD,verify=0,cert=testsrv6.crt,key=testsrv6.key" "" "tcpwrap-etc=$td" "ssl:[::1]:$PORT,cafile=testsrv6.crt,$SOCAT_EGD" 6 tcp $PORT -1
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -5989,7 +5990,7 @@ else
 gentestcert testsrv
 gentestcert testcli
 # openssl client accepts a "normal" certificate only when not in fips mode
-testserversec "$N" "$TEST" "$opts -s" "ssl:$LOCALHOST:$PORT,fork,retry=2,verify,cafile=testsrv.crt" "" "fips" "ssl-l:$PORT,pf=ip4,reuseaddr,cert=testsrv.crt,key=testsrv.key" 4 tcp "" -1
+testserversec "$N" "$TEST" "$opts" "ssl:$LOCALHOST:$PORT,fork,retry=2,verify,cafile=testsrv.crt" "" "fips" "ssl-l:$PORT,pf=ip4,reuseaddr,cert=testsrv.crt,key=testsrv.key" 4 tcp "" -1
 fi ;; # testaddrs, NUMCOND
 esac
 PORT=$((PORT+1))
@@ -7298,7 +7299,7 @@ elif ! feat=$(testaddrs udp ip4) || ! runsip4 >/dev/null; then
     $PRINTF "test $F_n $TEST... ${YELLOW}UDP4 not available${NORMAL}\n" $N
     numCANT=$((numCANT+1))
 else
-testserversec "$N" "$TEST" "$opts -s" "udp4-recvfrom:$PORT,reuseaddr" "" "sp=$PORT" "udp4-sendto:127.0.0.1:$PORT" 4 udp $PORT 0
+testserversec "$N" "$TEST" "$opts" "udp4-recvfrom:$PORT,reuseaddr" "" "sp=$PORT" "udp4-sendto:127.0.0.1:$PORT" 4 udp $PORT 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -7313,7 +7314,7 @@ elif ! feat=$(testaddrs udp ip4) || ! runsip4 >/dev/null; then
     $PRINTF "test $F_n $TEST... ${YELLOW}UDP4 not available${NORMAL}\n" $N
     numCANT=$((numCANT+1))
 else
-testserversec "$N" "$TEST" "$opts -s" "udp4-recvfrom:$PORT,reuseaddr" "" "lowport" "udp4-sendto:127.0.0.1:$PORT" 4 udp $PORT 0
+testserversec "$N" "$TEST" "$opts" "udp4-recvfrom:$PORT,reuseaddr" "" "lowport" "udp4-sendto:127.0.0.1:$PORT" 4 udp $PORT 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -7323,9 +7324,9 @@ NAME=UDP4RECVFROM_RANGE
 case "$TESTS" in
 *%$N%*|*%functions%*|*%security%*|*%udp%*|*%udp4%*|*%ip4%*|*%range%*|*%$NAME%*)
 TEST="$NAME: security of UDP4-RECVFROM with RANGE option"
-#testserversec "$N" "$TEST" "$opts -s" "udp4-recvfrom:$PORT,reuseaddr,fork" "" "range=$SECONDADDR/32" "udp4-sendto:127.0.0.1:$PORT" 4 udp $PORT 0
+#testserversec "$N" "$TEST" "$opts" "udp4-recvfrom:$PORT,reuseaddr,fork" "" "range=$SECONDADDR/32" "udp4-sendto:127.0.0.1:$PORT" 4 udp $PORT 0
 if ! eval $NUMCOND; then :; else
-testserversec "$N" "$TEST" "$opts -s" "udp4-recvfrom:$PORT,reuseaddr" "" "range=$SECONDADDR/32" "udp4-sendto:127.0.0.1:$PORT" 4 udp $PORT 0
+testserversec "$N" "$TEST" "$opts" "udp4-recvfrom:$PORT,reuseaddr" "" "range=$SECONDADDR/32" "udp4-sendto:127.0.0.1:$PORT" 4 udp $PORT 0
 fi ;; # NUMCOND
 esac
 PORT=$((PORT+1))
@@ -7344,8 +7345,8 @@ ha="$td/hosts.allow"
 hd="$td/hosts.deny"
 $ECHO "socat: $SECONDADDR" >"$ha"
 $ECHO "ALL: ALL" >"$hd"
-#testserversec "$N" "$TEST" "$opts -s" "udp4-recvfrom:$PORT,reuseaddr,fork" "" "tcpwrap=$d" "udp4-sendto:127.0.0.1:$PORT" 4 udp $PORT 0
-testserversec "$N" "$TEST" "$opts -s" "udp4-recvfrom:$PORT,reuseaddr" "" "tcpwrap-etc=$td" "udp4-sendto:127.0.0.1:$PORT" 4 udp $PORT 0
+#testserversec "$N" "$TEST" "$opts" "udp4-recvfrom:$PORT,reuseaddr,fork" "" "tcpwrap=$d" "udp4-sendto:127.0.0.1:$PORT" 4 udp $PORT 0
+testserversec "$N" "$TEST" "$opts" "udp4-recvfrom:$PORT,reuseaddr" "" "tcpwrap-etc=$td" "udp4-sendto:127.0.0.1:$PORT" 4 udp $PORT 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -7366,7 +7367,7 @@ PORT2=$PORT; PORT=$((PORT+1))
 PORT3=$PORT
 # we use the forward channel (PORT1) for testing, and have a backward channel
 # (PORT2) to get the data back, so we get the classical echo behaviour
-testserversec "$N" "$TEST" "$opts -s" "udp4-recv:$PORT1,reuseaddr!!udp4-sendto:127.0.0.1:$PORT2" "" "sp=$PORT3" "udp4-recv:$PORT2!!udp4-sendto:127.0.0.1:$PORT1" 4 udp $PORT1 0
+testserversec "$N" "$TEST" "$opts" "udp4-recv:$PORT1,reuseaddr!!udp4-sendto:127.0.0.1:$PORT2" "" "sp=$PORT3" "udp4-recv:$PORT2!!udp4-sendto:127.0.0.1:$PORT1" 4 udp $PORT1 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -7385,7 +7386,7 @@ PORT1=$PORT; PORT=$((PORT+1))
 PORT2=$PORT
 # we use the forward channel (PORT1) for testing, and have a backward channel
 # (PORT2) to get the data back, so we get the classical echo behaviour
-testserversec "$N" "$TEST" "$opts -s" "udp4-recv:$PORT1,reuseaddr!!udp4-sendto:127.0.0.1:$PORT2" "" "lowport" "udp4-recv:$PORT2!!udp4-sendto:127.0.0.1:$PORT1" 4 udp $PORT1 0
+testserversec "$N" "$TEST" "$opts" "udp4-recv:$PORT1,reuseaddr!!udp4-sendto:127.0.0.1:$PORT2" "" "lowport" "udp4-recv:$PORT2!!udp4-sendto:127.0.0.1:$PORT1" 4 udp $PORT1 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -7404,7 +7405,7 @@ PORT1=$PORT; PORT=$((PORT+1))
 PORT2=$PORT
 # we use the forward channel (PORT1) for testing, and have a backward channel
 # (PORT2) to get the data back, so we get the classical echo behaviour
-testserversec "$N" "$TEST" "$opts -s" "udp4-recv:$PORT1,reuseaddr!!udp4-sendto:127.0.0.1:$PORT2" "" "range=$SECONDADDR/32" "udp4-recv:$PORT2!!udp4-sendto:127.0.0.1:$PORT1" 4 udp $PORT1 0
+testserversec "$N" "$TEST" "$opts" "udp4-recv:$PORT1,reuseaddr!!udp4-sendto:127.0.0.1:$PORT2" "" "range=$SECONDADDR/32" "udp4-recv:$PORT2!!udp4-sendto:127.0.0.1:$PORT1" 4 udp $PORT1 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -7427,7 +7428,7 @@ $ECHO "socat: $SECONDADDR" >"$ha"
 $ECHO "ALL: ALL" >"$hd"
 # we use the forward channel (PORT1) for testing, and have a backward channel
 # (PORT2) to get the data back, so we get the classical echo behaviour
-testserversec "$N" "$TEST" "$opts -s" "udp4-recv:$PORT1,reuseaddr!!udp4-sendto:127.0.0.1:$PORT2" "" "tcpwrap-etc=$td" "udp4-recv:$PORT2!!udp4-sendto:127.0.0.1:$PORT1" 4 udp $PORT1 0
+testserversec "$N" "$TEST" "$opts" "udp4-recv:$PORT1,reuseaddr!!udp4-sendto:127.0.0.1:$PORT2" "" "tcpwrap-etc=$td" "udp4-recv:$PORT2!!udp4-sendto:127.0.0.1:$PORT1" 4 udp $PORT1 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -7443,7 +7444,7 @@ elif ! feat=$(testaddrs udp ip6) || ! runsip6 >/dev/null; then
     $PRINTF "test $F_n $TEST... ${YELLOW}UDP6 not available${NORMAL}\n" $N
     numCANT=$((numCANT+1))
 else
-testserversec "$N" "$TEST" "$opts -s" "udp6-recvfrom:$PORT,reuseaddr" "" "sp=$PORT" "udp6-sendto:[::1]:$PORT" 6 udp $PORT 0
+testserversec "$N" "$TEST" "$opts" "udp6-recvfrom:$PORT,reuseaddr" "" "sp=$PORT" "udp6-sendto:[::1]:$PORT" 6 udp $PORT 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -7458,7 +7459,7 @@ elif ! feat=$(testaddrs udp ip6) || ! runsip6 >/dev/null; then
     $PRINTF "test $F_n $TEST... ${YELLOW}UDP6 not available${NORMAL}\n" $N
     numCANT=$((numCANT+1))
 else
-testserversec "$N" "$TEST" "$opts -s" "udp6-recvfrom:$PORT,reuseaddr" "" "lowport" "udp6-sendto:[::1]:$PORT" 6 udp $PORT 0
+testserversec "$N" "$TEST" "$opts" "udp6-recvfrom:$PORT,reuseaddr" "" "lowport" "udp6-sendto:[::1]:$PORT" 6 udp $PORT 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -7473,8 +7474,8 @@ elif ! feat=$(testaddrs tcp ip6) || ! runsip6 >/dev/null; then
     $PRINTF "test $F_n $TEST... ${YELLOW}TCP6 not available${NORMAL}\n" $N
     numCANT=$((numCANT+1))
 else
-#testserversec "$N" "$TEST" "$opts -s" "udp6-recvfrom:$PORT,reuseaddr,fork" "" "range=[::2/128]" "udp6-sendto:[::1]:$PORT" 6 udp $PORT 0
-testserversec "$N" "$TEST" "$opts -s" "udp6-recvfrom:$PORT,reuseaddr" "" "range=[::2/128]" "udp6-sendto:[::1]:$PORT" 6 udp $PORT 0
+#testserversec "$N" "$TEST" "$opts" "udp6-recvfrom:$PORT,reuseaddr,fork" "" "range=[::2/128]" "udp6-sendto:[::1]:$PORT" 6 udp $PORT 0
+testserversec "$N" "$TEST" "$opts" "udp6-recvfrom:$PORT,reuseaddr" "" "range=[::2/128]" "udp6-sendto:[::1]:$PORT" 6 udp $PORT 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -7493,7 +7494,7 @@ ha="$td/hosts.allow"
 hd="$td/hosts.deny"
 $ECHO "socat: [::2]" >"$ha"
 $ECHO "ALL: ALL" >"$hd"
-testserversec "$N" "$TEST" "$opts -s" "udp6-recvfrom:$PORT,reuseaddr" "" "tcpwrap-etc=$td" "udp6-sendto:[::1]:$PORT" 6 udp $PORT 0
+testserversec "$N" "$TEST" "$opts" "udp6-recvfrom:$PORT,reuseaddr" "" "tcpwrap-etc=$td" "udp6-sendto:[::1]:$PORT" 6 udp $PORT 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -7514,7 +7515,7 @@ PORT2=$PORT; PORT=$((PORT+1))
 PORT3=$PORT
 # we use the forward channel (PORT1) for testing, and have a backward channel
 # (PORT2) to get the data back, so we get the classical echo behaviour
-testserversec "$N" "$TEST" "$opts -s" "udp6-recv:$PORT1,reuseaddr!!udp6-sendto:[::1]:$PORT2" "" "sp=$PORT3" "udp6-recv:$PORT2!!udp6-sendto:[::1]:$PORT1" 6 udp $PORT1 0
+testserversec "$N" "$TEST" "$opts" "udp6-recv:$PORT1,reuseaddr!!udp6-sendto:[::1]:$PORT2" "" "sp=$PORT3" "udp6-recv:$PORT2!!udp6-sendto:[::1]:$PORT1" 6 udp $PORT1 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -7533,7 +7534,7 @@ PORT1=$PORT; PORT=$((PORT+1))
 PORT2=$PORT
 # we use the forward channel (PORT1) for testing, and have a backward channel
 # (PORT2) to get the data back, so we get the classical echo behaviour
-testserversec "$N" "$TEST" "$opts -s" "udp6-recv:$PORT1,reuseaddr!!udp6-sendto:[::1]:$PORT2" "" "lowport" "udp6-recv:$PORT2!!udp6-sendto:[::1]:$PORT1" 6 udp $PORT1 0
+testserversec "$N" "$TEST" "$opts" "udp6-recv:$PORT1,reuseaddr!!udp6-sendto:[::1]:$PORT2" "" "lowport" "udp6-recv:$PORT2!!udp6-sendto:[::1]:$PORT1" 6 udp $PORT1 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -7552,7 +7553,7 @@ PORT1=$PORT; PORT=$((PORT+1))
 PORT2=$PORT
 # we use the forward channel (PORT1) for testing, and have a backward channel
 # (PORT2) to get the data back, so we get the classical echo behaviour
-testserversec "$N" "$TEST" "$opts -s" "udp6-recv:$PORT1,reuseaddr!!udp6-sendto:[::1]:$PORT2" "" "range=[::2/128]" "udp6-recv:$PORT2!!udp6-sendto:[::1]:$PORT1" 6 udp $PORT1 0
+testserversec "$N" "$TEST" "$opts" "udp6-recv:$PORT1,reuseaddr!!udp6-sendto:[::1]:$PORT2" "" "range=[::2/128]" "udp6-recv:$PORT2!!udp6-sendto:[::1]:$PORT1" 6 udp $PORT1 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -7575,7 +7576,7 @@ PORT1=$PORT; PORT=$((PORT+1))
 PORT2=$PORT
 # we use the forward channel (PORT1) for testing, and have a backward channel
 # (PORT2) to get the data back, so we get the classical echo behaviour
-testserversec "$N" "$TEST" "$opts -s" "udp6-recv:$PORT1,reuseaddr!!udp6-sendto:[::1]:$PORT2" "" "tcpwrap-etc=$td" "udp6-recv:$PORT2!!udp6-sendto:[::1]:$PORT1" 6 udp $PORT1 0
+testserversec "$N" "$TEST" "$opts" "udp6-recv:$PORT1,reuseaddr!!udp6-sendto:[::1]:$PORT2" "" "tcpwrap-etc=$td" "udp6-recv:$PORT2!!udp6-sendto:[::1]:$PORT1" 6 udp $PORT1 0
 fi ;; # NUMCOND, feats
 esac
 PORT=$((PORT+1))
@@ -7594,8 +7595,8 @@ elif [ $(id -u) -ne 0 -a "$withroot" -eq 0 ]; then
     $PRINTF "test $F_n $TEST... ${YELLOW}must be root${NORMAL}\n" $N
     numCANT=$((numCANT+1))
 else
-#testserversec "$N" "$TEST" "$opts -s" "ip4-recvfrom:$PROTO,reuseaddr,fork" "" "range=$SECONDADDR/32" "ip4-sendto:127.0.0.1:$PROTO" 4 ip $PROTO 0
-testserversec "$N" "$TEST" "$opts -s" "ip4-recvfrom:$PROTO,reuseaddr!!udp4-sendto:127.0.0.1:$PORT" "" "range=$SECONDADDR/32" "udp4-recv:$PORT!!ip4-sendto:127.0.0.1:$PROTO" 4 ip $PROTO 0
+#testserversec "$N" "$TEST" "$opts" "ip4-recvfrom:$PROTO,reuseaddr,fork" "" "range=$SECONDADDR/32" "ip4-sendto:127.0.0.1:$PROTO" 4 ip $PROTO 0
+testserversec "$N" "$TEST" "$opts" "ip4-recvfrom:$PROTO,reuseaddr!!udp4-sendto:127.0.0.1:$PORT" "" "range=$SECONDADDR/32" "udp4-recv:$PORT!!ip4-sendto:127.0.0.1:$PROTO" 4 ip $PROTO 0
 fi ;; # NUMCOND, feats, root
 esac
 PROTO=$((PROTO+1))
@@ -7618,8 +7619,8 @@ ha="$td/hosts.allow"
 hd="$td/hosts.deny"
 $ECHO "socat: $SECONDADDR" >"$ha"
 $ECHO "ALL: ALL" >"$hd"
-#testserversec "$N" "$TEST" "$opts -s" "ip4-recvfrom:$PROTO,reuseaddr,fork" "" "tcpwrap-etc=$td" "ip4-sendto:127.0.0.1:$PROTO" 4 ip $PROTO 0
-testserversec "$N" "$TEST" "$opts -s" "ip4-recvfrom:$PROTO,reuseaddr!!udp4-sendto:127.0.0.1:$PORT" "" "tcpwrap-etc=$td" "udp4-recv:$PORT!!ip4-sendto:127.0.0.1:$PROTO" 4 ip $PROTO 0
+#testserversec "$N" "$TEST" "$opts" "ip4-recvfrom:$PROTO,reuseaddr,fork" "" "tcpwrap-etc=$td" "ip4-sendto:127.0.0.1:$PROTO" 4 ip $PROTO 0
+testserversec "$N" "$TEST" "$opts" "ip4-recvfrom:$PROTO,reuseaddr!!udp4-sendto:127.0.0.1:$PORT" "" "tcpwrap-etc=$td" "udp4-recv:$PORT!!ip4-sendto:127.0.0.1:$PROTO" 4 ip $PROTO 0
 fi # NUMCOND, feats, root
  ;;
 esac
@@ -7644,7 +7645,7 @@ PROTO1=$PROTO; PROTO=$((PROTO+1))
 PROTO2=$PROTO
 # we use the forward channel (PROTO1) for testing, and have a backward channel
 # (PROTO2) to get the data back, so we get the classical echo behaviour
-testserversec "$N" "$TEST" "$opts -s" "ip4-recv:$PROTO1,reuseaddr!!ip4-sendto:127.0.0.1:$PROTO2" "" "range=$SECONDADDR/32" "ip4-recv:$PROTO2!!ip4-sendto:127.0.0.1:$PROTO1" 4 ip $PROTO1 0
+testserversec "$N" "$TEST" "$opts" "ip4-recv:$PROTO1,reuseaddr!!ip4-sendto:127.0.0.1:$PROTO2" "" "range=$SECONDADDR/32" "ip4-recv:$PROTO2!!ip4-sendto:127.0.0.1:$PROTO1" 4 ip $PROTO1 0
 fi ;; # NUMCOND, feats, root
 esac
 PROTO=$((PROTO+1))
@@ -7672,7 +7673,7 @@ $ECHO "socat: $SECONDADDR" >"$ha"
 $ECHO "ALL: ALL" >"$hd"
 # we use the forward channel (PROTO1) for testing, and have a backward channel
 # (PROTO2) to get the data back, so we get the classical echo behaviour
-testserversec "$N" "$TEST" "$opts -s" "ip4-recv:$PROTO1,reuseaddr!!ip4-sendto:127.0.0.1:$PROTO2" "" "tcpwrap-etc=$td" "ip4-recv:$PROTO2!!ip4-sendto:127.0.0.1:$PROTO1" 4 ip $PROTO1 0
+testserversec "$N" "$TEST" "$opts" "ip4-recv:$PROTO1,reuseaddr!!ip4-sendto:127.0.0.1:$PROTO2" "" "tcpwrap-etc=$td" "ip4-recv:$PROTO2!!ip4-sendto:127.0.0.1:$PROTO1" 4 ip $PROTO1 0
 fi ;; # NUMCOND, feats, root
 esac
 PROTO=$((PROTO+1))
@@ -7691,8 +7692,8 @@ elif [ $(id -u) -ne 0 -a "$withroot" -eq 0 ]; then
     $PRINTF "test $F_n $TEST... ${YELLOW}must be root${NORMAL}\n" $N
     numCANT=$((numCANT+1))
 else
-#testserversec "$N" "$TEST" "$opts -s" "ip6-recvfrom:$PROTO,reuseaddr,fork" "" "range=[::2/128]" "ip6-sendto:[::1]:$PROTO" 6 ip $PROTO 0
-testserversec "$N" "$TEST" "$opts -s" "ip6-recvfrom:$PROTO,reuseaddr!!udp6-sendto:[::1]:$PORT" "" "range=[::2/128]" "udp6-recv:$PORT!!ip6-sendto:[::1]:$PROTO" 6 ip $PROTO 0
+#testserversec "$N" "$TEST" "$opts" "ip6-recvfrom:$PROTO,reuseaddr,fork" "" "range=[::2/128]" "ip6-sendto:[::1]:$PROTO" 6 ip $PROTO 0
+testserversec "$N" "$TEST" "$opts" "ip6-recvfrom:$PROTO,reuseaddr!!udp6-sendto:[::1]:$PORT" "" "range=[::2/128]" "udp6-recv:$PORT!!ip6-sendto:[::1]:$PROTO" 6 ip $PROTO 0
 fi ;; # NUMCOND, feats
 esac
 PROTO=$((PROTO+1))
@@ -7715,8 +7716,8 @@ ha="$td/hosts.allow"
 hd="$td/hosts.deny"
 $ECHO "socat: [::2]" >"$ha"
 $ECHO "ALL: ALL" >"$hd"
-#testserversec "$N" "$TEST" "$opts -s" "ip6-recvfrom:$PROTO,reuseaddr,fork" "" "tcpwrap-etc=$td" "ip6-sendto:[::1]:$PROTO" 6 ip $PROTO 0
-testserversec "$N" "$TEST" "$opts -s" "ip6-recvfrom:$PROTO,reuseaddr!!udp6-sendto:[::1]:$PORT" "" "tcpwrap-etc=$td" "udp6-recv:$PORT!!ip6-sendto:[::1]:$PROTO" 6 ip $PROTO 0
+#testserversec "$N" "$TEST" "$opts" "ip6-recvfrom:$PROTO,reuseaddr,fork" "" "tcpwrap-etc=$td" "ip6-sendto:[::1]:$PROTO" 6 ip $PROTO 0
+testserversec "$N" "$TEST" "$opts" "ip6-recvfrom:$PROTO,reuseaddr!!udp6-sendto:[::1]:$PORT" "" "tcpwrap-etc=$td" "udp6-recv:$PORT!!ip6-sendto:[::1]:$PROTO" 6 ip $PROTO 0
 fi ;; # NUMCOND, feats
 esac
 PROTO=$((PROTO+1))
@@ -7740,7 +7741,7 @@ PROTO1=$PROTO; PROTO=$((PROTO+1))
 PROTO2=$PROTO
 # we use the forward channel (PROTO1) for testing, and have a backward channel
 # (PROTO2) to get the data back, so we get the classical echo behaviour
-testserversec "$N" "$TEST" "$opts -s" "ip6-recv:$PROTO1,reuseaddr!!ip6-sendto:[::1]:$PROTO2" "" "range=[::2/128]" "ip6-recv:$PROTO2!!ip6-sendto:[::1]:$PROTO1" 6 ip $PROTO1 0
+testserversec "$N" "$TEST" "$opts" "ip6-recv:$PROTO1,reuseaddr!!ip6-sendto:[::1]:$PROTO2" "" "range=[::2/128]" "ip6-recv:$PROTO2!!ip6-sendto:[::1]:$PROTO1" 6 ip $PROTO1 0
 fi ;; # NUMCOND, feats
 esac
 PROTO=$((PROTO+1))
@@ -7766,7 +7767,7 @@ $ECHO "socat: [::2]" >"$ha"
 $ECHO "ALL: ALL" >"$hd"
 # we use the forward channel (PROTO1) for testing, and have a backward channel
 # (PROTO2) to get the data back, so we get the classical echo behaviour
-testserversec "$N" "$TEST" "$opts -s" "ip6-recv:$PROTO1,reuseaddr!!ip6-sendto:[::1]:$PROTO2" "" "tcpwrap-etc=$td" "ip6-recv:$PROTO2!!ip6-sendto:[::1]:$PROTO1" 6 ip $PROTO1 0
+testserversec "$N" "$TEST" "$opts" "ip6-recv:$PROTO1,reuseaddr!!ip6-sendto:[::1]:$PROTO2" "" "tcpwrap-etc=$td" "ip6-recv:$PROTO2!!ip6-sendto:[::1]:$PROTO1" 6 ip $PROTO1 0
 fi ;; # NUMCOND, feats
 esac
 PROTO=$((PROTO+1))
@@ -8488,7 +8489,7 @@ N=$((N+1))
 #elif [ -z "$BCADDR" ]; then
 #    $PRINTF "test $F_n $TEST... ${YELLOW}dont know a broadcast address${NORMAL}\n" $N
 #else
-#testserversec "$N" "$TEST" "$opts -s" "UDP4-BROADCAST:$BCADDR/8:$PORT" "" "range=127.1.0.0:255.255.0.0" "udp4:127.1.0.0:$PORT" 4 udp $PORT 0
+#testserversec "$N" "$TEST" "$opts" "UDP4-BROADCAST:$BCADDR/8:$PORT" "" "range=127.1.0.0:255.255.0.0" "udp4:127.1.0.0:$PORT" 4 udp $PORT 0
 #fi ;; # NUMCOND, feats
 #esac
 #PORT=$((PORT+1))
@@ -10566,7 +10567,7 @@ elif [ -z "$SECONDADDR" ]; then
     numCANT=$((numCANT+1))
 else
 ts1p=$(printf "%04x" $PORT);
-testserversec "$N" "$TEST" "$opts -s" "SOCKET-LISTEN:2:6:x${ts1p}x00000000x0000000000000000,reuseaddr,fork,retry=1" "" "range=x0000x7f000000:x0000xffffffff" "SOCKET-CONNECT:2:6:x${ts1p}x${SECONDADDRHEX}x0000000000000000" 4 tcp $PORT 0
+testserversec "$N" "$TEST" "$opts" "SOCKET-LISTEN:2:6:x${ts1p}x00000000x0000000000000000,reuseaddr,fork,retry=1" "" "range=x0000x7f000000:x0000xffffffff" "SOCKET-CONNECT:2:6:x${ts1p}x${SECONDADDRHEX}x0000000000000000" 4 tcp $PORT 0
 fi ;; # NUMCOND, $SECONDADDR
 esac
 PORT=$((PORT+1))
@@ -11685,7 +11686,7 @@ tf="$td/test$N.stdout"
 te="$td/test$N.stderr"
 tdiff="$td/test$N.diff"
 da="test$N $(date) $RANDOM"
-#testserversec "$N" "$TEST" "$opts -s" "tcp4-l:$PORT,reuseaddr,fork,retry=1" "" "range=$SECONDADDR/32" "tcp4:127.0.0.1:$PORT" 4 tcp $PORT 0
+#testserversec "$N" "$TEST" "$opts" "tcp4-l:$PORT,reuseaddr,fork,retry=1" "" "range=$SECONDADDR/32" "tcp4:127.0.0.1:$PORT" 4 tcp $PORT 0
 CMD0="$TRACE $SOCAT $opts -u TCP4-LISTEN:$PORT,reuseaddr,range=127.0.0.1/0 CREATE:$tf"
 CMD1="$TRACE $SOCAT $opts -u - TCP4-CONNECT:$SECONDADDR:$PORT,bind=$SECONDADDR"
 printf "test $F_n $TEST... " $N